https://wiki.steamhorse.net/ 2026-04-19T13:32:30+00:00 https://wiki.steamhorse.net/ https://wiki.steamhorse.net/_media/wiki/logo.png text/html 2025-09-10T14:21:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.steamhorse.net/projects/nardoragon_suit/head?rev=1757514084&do=diff Head with gas mask Materials used for printing * For every part except the ears: LWPLA (ColorFabb) from 3Djake * For the ears: Foamy TPU (FilaFlex) from 3Djake Materials used for post processing/painting * For all things black: Vallejo Model Air Black RLM22 (V71057) * Primer: Vallejo Surface Primer USN Light Ghost (70615) text/html 2025-03-17T13:21:15+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.steamhorse.net/projects/nardoragon_suit/lessons_learned?rev=1742217675&do=diff * LW-PLA and LW-TPU are excellent materials to use for fursuit stuff. Printing at around 50-60 % flow yielded the best results * Regular TPU is very good for creating flexible/rubbery and tough parts. Had good success by varying the infill density over a print to vary the softness/flexibility. Bambu labs' 95A HF TPU is actually much closer to the 85A hardness I tried before. As a side effect it does produce a fine white powder that seems to accumulate in the short PTFE tube where the filament…